Fabric Category

Swim Fabric Manufacturer in China

A weft-knitted nylon-spandex swim jersey, 170 GSM, 160 cm cut width, printed digitally in three house patterns. Made to order from 300 meters per print, with a batch test report in every carton.

This page covers the cloth itself — what the weight does to a garment, how the print is applied, and what a buyer commits to at each step. The fabric line is at MJ 30305 Swim Knit.

BASE CLOTH
170 GSM
75% nylon / 25% spandex
CUT WIDTH
160 cm
63 in, usable
MINIMUM
300 m
per print
FOB
$3.05-3.20
per meter, MJ 30305

Why swim is a different cloth, not a heavier jersey

Swim fabric is bought for three things a fashion jersey is not judged on: recovery after stretch, colour that survives chlorine and salt, and a seam that does not grin open when the garment is worn wet. All three come from the same place — the loop structure and the spandex fraction, not the finish.

A 170 GSM weft knit in 75% nylon and 25% spandex carries enough elastane to return to shape after being pulled over a hip or a shoulder, which is what lets a one-piece hold its leg line without a zip or a bonded power-mesh panel. Drop to 150 GSM and the same garment needs lining; go up to 200 and the cloth starts reading as ready-to-wear rather than swim.

Printing is the second decision. Digital carries no plate fee and no colour-count penalty, so a twelve-colour artwork costs the same to set up as a two-colour one — and a print can be rescaled or recoloured on the next run without a new screen set. For resort and swim capsules, where a pattern usually has to sit across four or five bodies, that is the difference between one development and five.

Specifications

ParameterSpecification
Base clothWeft-knitted swim jersey, four-way stretch
Composition75% nylon / 25% spandex (other ratios quoted per order)
Weight170 GSM — approx. 5.0 oz
Cut width160 cm / 63 in
Print methodDigital, no plate fee, no colour-count penalty
House prints3 — Amber Leopard, Cream Ripple, Cobalt Daisy
MOQ300 m per print
Lead time7-10 days house prints / 30-35 days custom
FOBUS $3.05-3.20 / m (MJ 30305)
PackingRolled, poly-wrapped, batch report in the carton
TermsFOB China port, CFR / CIF on request, T/T 30/70

Figures above describe MJ 30305. Other weights, widths and elastane ratios are quoted per construction rather than published as a fixed range, because the cost of a 220 GSM structured cloth and a 150 GSM lining cloth do not move together.

Choosing a weight

The weight question is really a garment question. This is how the four bands behave in cut-and-sew, and which one buyers take for which end use.

WeightTypical garmentWhat changes in the making
150-160 GSMLining and light bikiniThin enough to double up without bulk; the weight most buyers pick when the bottom needs a lining of the same cloth.
170 GSMOne-piece, bikini, tankiniThe house weight. Holds a leg line and a back without a power-mesh panel, and still dries flat.
190-200 GSMSport swim, resort cover-upsMore body and more opacity; used where the garment is cut close and worn outside the water.
220 GSM+Structured resort piecesQuoted per order. Heavier cloth reads as ready-to-wear rather than swim, and changes the seam plan.

Who we supply

Swim and resort brands

A print range that has to sit together in one drop, with the same ground cloth under all three patterns.

Private label and own-brand

Short runs from 300 m per print, artwork approved on screen before anything is cut.

Activewear labels

A smooth, springy hand for leggings and sports tops where compression is not the point.

Garment factories and converters

Cut-and-sew units that need a repeatable base cloth and a batch report per roll.

How a swim order runs

Five steps, in this order. The one that decides the timeline is step two: a strike-off on the actual base cloth, not a paper proof, because a print that reads correctly on paper can go chalky on a dark ground.

  1. 1. Send the brief — Weight, end use, print or solid, and the quantity per pattern.
  2. 2. Strike-off first — A digital strike-off on the actual base cloth, not a paper proof.
  3. 3. Approve and cut — Nothing is knitted to order until artwork and bulk are signed off.
  4. 4. Inspect uncut — AQL 2.5 in-line and a 4-point roll check before packing.
  5. 5. Ship with the report — Batch report in the carton so any claim traces to a roll and a dye lot.

B2B terms at a glance

MOQ
300 m per print — a three-print capsule starts at 900 m.
Lead time
7-10 days house prints; 30-35 days custom after approval.
Price
US $3.05-3.20/m FOB China port for MJ 30305, by design, packing and quantity.
Payment
T/T 30/70. Larger orders by agreement.
Shipping
FOB China port; CFR and CIF quoted on request.
Inspection
AQL 2.5 in-line, 4-point roll check, batch report in the carton.

Frequently asked questions

What swim fabric do you manufacture?

A 170 GSM weft-knitted swim jersey in 75% nylon and 25% spandex, 160 cm cut width, in three house digital prints. Other weights and constructions are quoted per order rather than held as a catalogue line.

What is the minimum order quantity?

300 meters per print. A three-print capsule therefore starts at 900 meters.

Can you print our own artwork?

Yes. Digital printing needs no screen set and no plate fee, so a buyer-supplied file can go to strike-off directly. Custom artwork runs 30-35 days after approval.

Is there a colour-count penalty on a print?

No. Digital printing reproduces the file as supplied, so a twelve-colour artwork costs the same to set up as a two-colour one. That is the main reason swim prints move to digital.

What is the lead time?

7-10 days for the three house prints; 30-35 days for custom artwork after approval.

Do you hold stock?

No. Swim knit is made to order. Nothing is cut until the order and the artwork are confirmed.

Which garments is it used for?

Swimwear from one-piece to bikini and tankini, beachwear such as cover-ups and resort shirts, light activewear, and swimwear lining.

How do you handle chlorine and salt-water colour fastness?

Every batch carries a test report with the shipment, so a claim traces to the exact roll and dye lot. Ask for the report with the quote if your programme tests before cutting.

What does it cost?

US $3.05-3.20 per meter FOB China port for MJ 30305, depending on design, packing and quantity. Other weights and widths are quoted per construction.

Ask for a quote   See MJ 30305 — three prints

More Swim & Print Guides

MJ 30305 Swim Knit — Three PrintsDigital Print Service — No Plate FeeFabric Weight (GSM) GuideHow a FOB Price Is BuiltCustom Process
✉  Get a Quote 📱 Chat on WhatsApp