Table of Contents


Fuzz is not pilling

Double gauze is two layers of open-weave cotton, lightly joined. Our M4011 runs at 125 GSM, 135 cm. An open weave holds some short, loose fibre on the surface from spinning and weaving, and the first washes release it. Buyers see that release in the wash water or on a dark garment worn over the gauze and call it pilling. It is not. It is housekeeping — the cloth shedding what was never anchored.

A pill is different: fibre that is still anchored at one end, worked into a knot by rubbing, and held on the surface. Pills are what the grading tests measure, because pills are what a customer sees six months into wearing the garment.

How the Martindale test works

The method most apparel buyers mean when they say "pilling test" is ISO 12945-2: circular samples are rubbed against a standard abradant on a Martindale head, under a defined light pressure, for an agreed number of cycles. After rubbing, the samples are graded 1 to 5 by comparison with standard reference photographs — 5 is no visible change, 1 is severe pilling.

Two details decide whether the number means anything. First, the cycle count: a grade quoted after a short rub and the same grade quoted after a long rub are different promises, so the cycles belong in the report and in your spec. Second, the state of the cloth: unwashed, or after a stated number of domestic wash cycles. On gauze this second detail matters more than the first.

Why gauze needs its own reading of the grade

On a tight poplin, surface fibre has nowhere to go, so it either stays put or pills. On gauze the weave is open, so loose fibre has a third option: leave. That is why a gauze can look worse than a poplin straight off the roll and better than it after five washes — the loose fraction has gone, and what remains is the anchored cloth you will actually live with.

So when a lab report on gauze disappoints you, ask which state was tested before you argue with the mill. An unwashed-sample grade and an after-wash grade from the same lot can differ, and the after-wash grade is the one your customer will ever meet.

How to write the pilling clause

A pilling clause that survives inspection has four parts: the method (name it, e.g. ISO 12945-2), the cycles, the wash state (e.g. after five domestic washes), and the target grade on the 1–5 scale. Leave any one of the four out and the clause becomes an argument about method rather than about cloth.

One more practical note: test the lot you approved, with the lot number on the report. A generic certificate from a different production run proves the design of the cloth, not the delivery of it. Our fabric testing guide lists the full set of tests worth specifying; this article only asks you to write the pilling one properly.

What we publish and what we test on request

What we publish for M4011 double gauze is the construction: 125 GSM, 135 cm, 182 stock shades, FOB $1.40–2.20/m, 300 m per colour. The printed sister line M4011-1 runs at 140 GSM with stock designs in three colourways each, and digital printing has no design limit: any artwork, any colour count, no plate fee.

What we do not publish is a fixed pilling grade, and we would push back if a supplier offered you one without method, cycles and wash state attached. If your program needs a pilling number, we arrange a lot-specific test before bulk and put the report in your hands with the lot number on it. That is a slower answer than a brochure grade, and it is the only one that holds up at inspection.

Frequently asked questions

Does double gauze pill?

Any cotton surface can fuzz, and a loose gauze weave releases loose fibre in the first washes. Fuzz that washes away is not the same as anchored pills that stay. The test measures the anchored kind, which is why the wash state must be written into the test condition.

Which pilling test should I ask for?

For apparel gauze the common one is ISO 12945-2, the Martindale method: the sample is rubbed against a standard abradant under light pressure for an agreed number of cycles, then graded 1 to 5 against reference photographs, where 5 means no visible change. State the method, the cycle count and the wash state, or two labs will grade two different cloths.

What pilling grade should go on the PO?

Write a grade together with the method and the state of the cloth, for example a target grade after a stated number of washes. A bare number means nothing, because grade 4 on an unwashed sample and grade 4 after five washes are different promises.

Does washing make double gauze pill more?

Washing softens the cloth and releases the loose surface fibre, which is the fuzz people mistake for pilling. After the first washes the surface stabilises. If you want the honest number, test after the number of wash cycles your customer will actually put the garment through.

What is the minimum order for double gauze?

300 m per colour on the solid M4011 line, which is held in 182 stock shades at 125 GSM and 135 cm. The printed M4011-1 line runs at 140 GSM. Lot-specific test reports can be arranged on request before bulk.

The bottom line

Pilling on double gauze is mostly a specification problem. Separate fuzz from pills, test the approved lot after real washes, and write method, cycles, state and grade into the PO. Do that, and the inspection conversation becomes short.

Mujia Textile — running our own air-jet looms in Zhuji since 2012.