Stock Print or Custom Print: How to Choose a Printed Cotton Poplin Program
Short answer: Both printed poplin routes start at 300 m. Our 8135 floral is held in six colourways in stock and ships in about 10 days — take it when the print is not what sells the garment. Digital printing takes your own artwork with no plate fee and suits a colourway you cannot buy off the shelf. The decision is not volume. It is whether the artwork is yours.
Table of Contents
- Two routes, one minimum
- What the 8135 stock program actually is
- What digital changes — and what it does not
- Specification, side by side
- Hand, drape and how the print survives washing
- How to test printed poplin before bulk
- Frequently asked questions
Two routes, one minimum
Most buyers arrive at printed poplin with an assumption that turns out to be wrong: that digital printing is the small-order route and stock print is the volume route. On our floor both start at the same place. The 8135 floral is stocked in six colourways in stock at 300 metres per colourway, and digital print on the same 40s cotton poplin also opens at 300 metres, with no plate fee charged on either side.
So the order quantity does not choose the process for you. What chooses it is the artwork. If the floral already sells — if a buyer has seen it on a dress in a shop window and wants that exact print — you cannot substitute a different print and hope the customer does not notice. If instead the colourway is the brand's own, and no stock version of it exists anywhere, then stock print is not an option no matter how many metres you order.
There is a second variable that buyers usually discover later, and it costs them a season: calendar. Stock colourways ship in about ten days because the screens are already on the machine. Digital print needs a strike-off — a physical printed sample of your artwork on the actual base cloth — approved before the bulk run is scheduled. That approval step is not negotiable and it is not instant.
What the 8135 stock program actually is
8135 is a black floral on a cream ground, printed on 100% cotton poplin in a plain weave, 40S yarn count, running 90–120 GSM at 145 cm width. The weight band matters: at the lower end it behaves like a blouse cloth and presses flat under a warm iron; at the upper end it holds a skirt panel without lining. It is a dress, blouse and skirt print, and that is how it is positioned on our own 8135 product page. For the full weight-band breakdown of printed versus solid poplin, see our poplin weight bands guide (printed 90–120 vs solid 100–140 GSM).
Six colourways are held as stock:
- Cream-on-black — the ground and figure inverted for a darker, evening-leaning read
- Black-on-cream — the original direction, highest contrast, the version most often reordered
- Deep blue — a navy figure on a pale ground
- Caramel brown — warm neutral, works into autumn ranges without a colour change
- Olive green — muted, reads as a solid at three metres and as a print at one
- Rust red — the strongest of the six in a shop-light setting
Because these colourways are already running, the cost structure is fixed and published: USD 1.68 per metre at 300–999 m, USD 1.63 at 1,000–1,999 m and USD 1.58 at 2,000 m and above, FOB Ningbo, with no plate fee. Lead time is approximately ten days after order confirmation. For a buyer filling a repeat order against a print that already sold, that combination — known colourway, known price, ten days — is difficult to beat.
What digital changes — and what it does not
Digital print changes the artwork question entirely. You send a file, we print strike-offs for your approval, and the bulk run follows. No screens are cut, so there is no plate fee and no minimum imposed by screen economics. That is the whole advantage: a colourway that exists only in your brand's line sheet becomes producible at 300 metres.
What digital does not change is the cloth underneath. It is still 40s cotton poplin, still plain weave, still the same 90–120 GSM band and 145 cm width. Buyers sometimes expect a digital route to unlock a lighter or heavier base — it does not. If the garment needs a different weight, that is a base-cloth conversation, not a printing conversation, and it belongs in the specification before the print is discussed at all.
Two practical consequences follow. First, digital print rewards artwork that is genuinely yours: an in-house floral, a licensed design, a colourway matched to a Pantone reference that no mill stocks. Second, if your artwork is close to a stock print but not identical — same motif, different ground — the honest comparison is not "digital is cheaper at low volume." It is "stock is faster and priced, digital is exact and needs approval time."
Specification, side by side
| Parameter | 8135 stock print | Digital print |
|---|---|---|
| Artwork source | Our stock floral, six colourways | Your file, your colourway |
| Base cloth | 100% cotton poplin, plain weave | 100% cotton poplin, plain weave |
| Yarn count | 40S | 40S |
| Weight | 90–120 GSM | 90–120 GSM |
| Width | 145 cm | 145 cm |
| Minimum order | 300 m per colourway | 300 m |
| Plate fee | None | None |
| Lead time | Approx. 10 days after confirmation | Strike-off approval, then bulk |
| FOB price | USD 1.68 / 1.63 / 1.58 per m at 300 / 1,000 / 2,000 m | Quoted per artwork and colour count |
| Best fit | Repeat orders on a print that already sells | Own artwork, own colourway, no stock equivalent |
The table is deliberately flat, because the two routes are the same cloth. Everything that differs sits above the fabric: who owns the artwork, how long approval takes, and how the price is set. Solid dyed poplin is a third route and a different conversation entirely — 154 stock shades at 100–140 GSM, no print at all, roughly fifteen days after colour confirmation.
Hand, drape and how the print survives washing
Poplin's character comes from its weave, not its print. A high warp density against a lower weft count produces the fine cross-rib that gives poplin its dry, crisp hand and its ability to hold a collar stand without fusible. Printing sits on top of that structure. What changes the hand after printing is the finishing route — the softener and the calendar — not the print method itself, and that is a line item you can specify.
Wash fastness is where the routes diverge in practice, and where buyers should ask for data rather than accept a promise. Rotaries lay down a thicker film of colour into the cloth; digital inks sit closer to the surface. On pale grounds and dark figures — exactly the 8135 direction — a poorly specified digital print can lose definition at the figure edge after repeated washing, while a well-specified one holds. The difference is in the ink set and the fixation, not in the word "digital."
The general principles behind printed cotton — pigment versus reactive, ground and figure interaction, repeat economics — are set out in our printed cotton buyers guide. The only reliable answer on fastness, though, is test data on the colourway you are actually buying. Ask for wash-fastness results covering colour change and staining, on the specific ground-and-figure combination, at the wash temperature your care label will carry. A generic certificate covering "printed cotton" tells you very little about a black figure on a cream ground.
How to test printed poplin before bulk
Four checks, in this order, will catch most of what goes wrong with printed poplin:
- Approve a strike-off, not a screen colour. A monitor cannot show you how a black figure sits on a cream ground. Ask for the physical print on the actual base cloth and judge it under daylight, not office light.
- Wash it three times. Three domestic washes at the temperature on your intended care label. Look for figure-edge bleed, ground yellowing and any change in hand. This is the single most predictive test and it costs one sample.
- Check the repeat against your marker. Print repeat and pattern-piece layout interact. A repeat that looks fine on a flat sample can waste 8–12% of the marker if it does not divide cleanly into your panel widths — a cost that belongs in the landed cost calculation, not in a surprise at cutting.
- Inspect the ground, not the figure. On a pale poplin ground, weaving defects and slubs show up where a darker print would hide them. Ask for the four-point inspection result on the actual lot, and look at the cream areas first.
One more item belongs in the purchase order rather than in testing: shade continuity across colourways. If a range uses cream-on-black for one style and black-on-cream for another, the two grounds must read as the same cream under the same light. Confirm that before the bulk run, because it cannot be fixed afterwards.
Frequently asked questions
What is the minimum order for printed cotton poplin?
300 metres. That applies both to our stocked 8135 colourways, where it is 300 m per colourway, and to digital print on the same base cloth. There is no plate fee on either route, so the minimum is set by the run, not by screen cost.
Is digital printing cheaper than stock print at 300 metres?
Not automatically. On 8135 the stock price is published at USD 1.68 per metre at 300 m and falls to 1.58 at 2,000 m. Digital is quoted per artwork and colour count, so a simple two-colour design can land close while a photographic or many-colour design will not. The honest comparison uses your own artwork, not a rule of thumb.
How long does printed cotton poplin take?
Stock 8135 colourways run about ten days after confirmation. Digital print takes longer because the strike-off has to be approved first, and that step sits on your side of the calendar as much as ours. Plan the approval into the schedule rather than treating it as a formality.
Does digital print fade after washing?
It depends on the ink set, the fixation and the colourway, not on the word digital. Ask for wash-fastness data on your specific ground-and-figure combination at your care-label temperature, and run a three-wash test on the strike-off. A generic printed-cotton certificate does not answer the question.
Can I put my own colourway on the 8135 floral?
Yes — that is the digital route. The motif stays, the colourway becomes yours, and no plate fee is charged. What you gain is exclusivity of colour; what you give up is the ten-day stock lead time, because the strike-off has to be approved first.
Choosing between them
Take the stock print when the print has already proven itself and the job is to refill the shelf. Six colourways, published prices from USD 1.68 at 300 m, ten days, no plate fee — that is a replenishment tool, and it is meant to be used that way.
Take digital when the colourway is the brand's own and no stock equivalent exists. Budget the strike-off approval into the calendar, specify the finishing you want for hand, and ask for wash-fastness data on the real combination.
Either way the cloth is the same 40s poplin at 90–120 GSM and 145 cm. Decide the print route on ownership of the artwork and on calendar, then specify the base cloth once and be done with it.
Mujia Textile — running our own air-jet looms in Zhuji since 2012.