Table of Contents


What “Pearl Crinkle Satin” Actually Means

Satin is a weave structure, not a fibre: warp floats dominate the face, which is why the surface reflects light the way it does. Almost all affordable satin in the export market today is 100% polyester woven on water-jet looms in and around Shaoxing, Keqiao, Changxing and Wujiang. When a buyer asks for “satin” without specifying more, they usually get quoted three very different cloths, and the differences decide whether the garment program works.

Plain (duchess or charmeuse) satin has a glass-flat face. It photographs beautifully, drapes like liquid — and shows every crease, press mark and fingernail scratch. Crinkle satin (also sold as crushed satin, pearl satin, satin backsplash or textured satin) carries a fine, all-over crushed texture applied in finishing. The texture does two things buyers should care about: it scatters light into a soft, moving pearl glow instead of a mirror flash, and it hides handling creases that would ruin a flat satin garment pulled from a suitcase or car seat.

There is a third family worth naming: stretched or spandex satin, which adds mechanical stretch for body-con dresses. It behaves differently in cutting and fusing, and mixing the three families in one quotation exercise is the most common first-mistake buyers make.

This guide uses one running reference cloth — Stretch Satin (MJ22126)MJ 22138 pearl crinkle satin, 175 GSM, 150 cm, 30 in-stock colours — to put numbers against every claim. The principles apply whether you buy from us or from anyone else in the cluster.


Weight: Choosing GSM by End Use

Weight is the single specification that most decides whether a satin garment looks expensive or cheap. Too light and the cloth collapses into static cling; too heavy and you lose the fluid drape that makes satin desirable. The honest ranges for polyester satin:

Weight (GSM)Typical End UseBehaviour Notes
90–120Linings, scarves, sheer overlaysLow opacity; needs French seams or lining in dresses
160–190Slip dresses, blouses, midi skirts, occasion wearHangs straight without lining in most dress blocks; gathers without bulk
200–240Structured blouses, jumpsuits, lighter suiting accentsHolds pleats; starts to lose fluidity
250–300Duchess bodices, bridewear, jacketsSculptural; blocks hand, not drape

MJ 22138 sits deliberately at 175 GSM — the centre of the dress band. At this weight a slip dress hangs straight from the strap without a lining, a gathered full skirt stays airy instead of heavy, and a long-sleeve blouse holds a soft shoulder drape without interfacing through the body. If your program mixes a slip dress and an occasion gown, you either bridge both with one 175 GSM cloth (accepting a softer gown) or run two weights; do not let a supplier tell you one weight is “fine for everything”.

One more weight trap: satin weight is quoted per square metre, but cutting yield is decided by width and shrinkage. A “cheaper” 150 cm cloth with 3% shrinkage can cost more per finished dress than a slightly dearer 160 cm cloth with 1.5%. Always compare price per usable finished metre, not price per meter.


Width, Cutting Yield and Roll Quality

Export satin is commonly woven at 150 cm and finished down a few millimetres. The number that matters for your pattern maker is not the quoted roll width but the usable cut width: the finished roll width minus the selvedge, minus any width loss in wash or finish. On a 150 cm cloth, plan for roughly 147–148 cm of usable cutting width and tell your factory that number explicitly.

Ask any prospective supplier three width questions before you book:

  • Is the quoted width finished or greige? Greige widths shrink in dyeing and finishing; a “160 cm greige” may finish at 150 cm.
  • What is the roll-to-roll width tolerance? Serious mills hold ±1 cm; loose suppliers drift 3–5 cm between batches, which quietly breaks a laying plan.
  • How are rolls inspected for width and flaws? A 4-point inspection report per roll is the export standard you should demand for dress programs.

Colour Strategy: Stock Card vs Lab Dips

The fastest way to waste six weeks on a satin program is to treat every colour as a custom job. Mills that keep a running colour card can ship the actual cloth in days; mills that lab-dip everything add a week per colour before bulk even starts.

A stock colour card also protects your reorders. When 30 shades are kept as running in-stock colours — as on MJ 22138's card No.1–30 — a repeat order six months later matches the same pearl white, wine and champagne without a new approval round. That matters more in satin than in matte cloth, because a satin face shows metamerism (shade shift under different light) far more dramatically.

When you do need a custom shade, the industry-standard path is a lab dip: a small dyed sample, typically $20–50 per colour with a 5–7 day turnaround. Approve the dip under the same light you will sell under (D65 for most Western retail), and always approve the dip on the actual base cloth — a dip on an off-weight satin predicts nothing about your bulk.

Two more colour notes that save money. First, order your colour card before your fabric, not after: asking five mills for "their satin price list" gets you five incompatible colour names, while comparing physical cards side by side gets you a decision in one afternoon. Second, lock the colour standard in writing: the approved swatch kept by both sides, referenced by number in the contract, becomes the arbiter in any shade dispute. A colour named only in an email - "pearl white, like the one you sent" - is a dispute waiting to happen.


MOQ, Pricing and Payment: What 300 m Buys You

Satin MOQs are driven by dye-batch economics. A 150 cm polyester satin consumes roughly 600–800 m per standard dye batch, but mills that keep running shades can top up small lots from bulk dyed yardage — which is why stock colours can go as low as 300 metres per colour while a genuine custom shade typically needs more.

Order ScenarioTypical MOQWhat to Watch
Stock colour, running cloth300 m per colourPrice flat from 300–2,000 m; mix colours freely in one order
Custom shade (lab dip approved)500–1,000 m per shadeDip fee $20–50/colour, 5–7 days; keep the dip as the standard
Custom base (new construction)1,000–3,000 mNew hanger + strike-off + pilot run; quote validity matters

On MJ 22138 the commercial terms are deliberately simple: FOB US $1.47–1.62 per meter depending on colour and packing, identical price from 300 m to 2,000 m per colour, so a first trial order pays the same meter rate as a replenishment. Payment runs T/T 30/70 — 30% with the order, 70% against shipping documents — with larger orders negotiable per order. Quotation is FOB (Ningbo or Shanghai); CFR and CIF are quoted on request.

Be careful with prices far below this band. Sub-$1.00 polyester satin exists and usually means one of three things: off-grade dye lots, reduced yarn denier with lower GSM than quoted, or rolls sold “as is” without inspection. The cheapest satin is the one you re-cut because the dye lot drifted.


Lead Times and the Sampling Ladder

Satin programs fail on calendar management more than on quality. The reliable structure looks like this:

  • A4 swatch cards — ship within days by courier; use them to shortlist colours before any commitment.
  • Lab dips (custom shades only) — $20–50 per colour, 5–7 days; approve under your selling light.
  • Strike-offs (printed programs) — one extra week; on crinkle satin, approve the strike-off after the crinkle finishing because texture changes apparent colour.
  • Bulk — 10–15 days for stock colours, 30–35 days for custom programmes, counted from deposit and approved sampling.

Build your critical path backwards from the ship date: bulk + shipping + customs is the fixed spine; everything before it is negotiable except the dip you actually approved. A mill that quotes one flat “7-10 days for everything” is either not including sampling or not planning to do it. Put the approved dip number, the bulk lead time and the ship window on one page and get it countersigned — one page beats a month of chat records when a date slips.


Testing and Quality: What to Demand

For a dress-weight polyester satin, the batch test set that actually predicts complaints:

PropertyMethod (AATCC / ISO)Why It Matters in Satin
Colour fastness, washingAATCC 61 / ISO 105-C06Deep shades (wine, coral) bleed fastest
Colour fastness, rubbingAATCC 8 / ISO 105-X12Satin face shows crocking on light linings
Light fastnessAATCC 16 / ISO 105-B02Pearl luster fades unevenly in shop windows
Dimensional stabilityAATCC 135 / ISO 6330Shrinkage breaks the cutting plan
Pilling / snaggingISO 12945-2 (Martindale)Filament satin snags on jewellery and velcro

Ask for the report to carry a batch number traceable to your shipment, not a “typical results” datasheet. On our own line, every MJ 22138 batch ships under MTQS (Mujia Textile Quality Standard), certificate No. MTQS-2026-000004 — a 12-parameter check using AATCC and ISO methods with the report issued with every shipment. OEKO-TEX STANDARD 100 Class II is available through our partner dyehouse on request.


How to Verify a Satin Supplier in Keqiao

Keqiao lists tens of thousands of fabric sellers; a meaningful share are traders renting a showroom. Before wiring a deposit on a satin program:

  • Check the business licence scope and registration year. A company registered last month with “trading” scope is a different risk profile from an operator in the cluster since 2012.
  • Ask for a live video walk of the warehouse, not a catalogue. You want to see running rolls of the cloth you are buying, with visible item numbers.
  • Request a batch-report template before ordering. If the “QC report” they send is a stock PDF with no batch number, treat the price as suspect.
  • Buy one sample meter of each shortlisted colour and wash it twice at 40°C. Check shade shift, handle change and crinkle retention — this “$10 audit” beats most certificates.
  • Confirm who owns the dye relationship. If your supplier cannot name the dye house, they cannot promise a colour match on your reorder.

None of these steps is exotic. They are the difference between a satin program that reorders cleanly and one that starts over every season.

At the quotation stage, three red flags cover most of the trouble buyers meet. A quote that arrives within an hour of your enquiry, complete with test reports, is a template, not an answer - real quotes wait for the colour and quantity to be confirmed. A supplier who answers every technical question with "yes, no problem" is not listening; the useful answers are the ones that push back ("175 GSM at 150 cm in that shade needs a heavier ground"). And a price 30% below the band with a promise of "same quality" is not a discount, it is a different cloth; the denier, the finishing and the inspection were all quietly removed. Serious suppliers lose orders politely because they answered honestly; those are usually the ones worth keeping.


Packing, Shipping and Container Loading

Polyester satin packs light and voluminous: expect roughly 15,000–20,000 metres on rolls in a 20ft container depending on roll width, tube and carton spec. Standard export packing is rolls in poly bags inside woven-bagged bales or cartons; ask explicitly for roll labelling with item number, colour code, GSM and lot number so your warehouse can QC against the batch report without unwrapping every roll.

Two satin-specific packing notes: first, crinkle textures emboss themselves under compression — over-packed cartons can set the crush pattern into the roll ends, which shows up after garment cutting. Second, keep satin away from velvet and terry in mixed containers; pile fabrics shed onto a satin face and the picking-out cost exceeds the freight saving.


Frequently Asked Questions

What is the difference between crinkle satin and plain satin?

Plain (duchess or charmeuse) satin has a glass-flat face that reflects light in one clean sheet; it shows every crease and press mark. Crinkle (crushed, pearl) satin carries a fine all-over texture that scatters light into a soft pearl glow and hides handling creases. Same fibre content, different finishing, and very different behaviour in a garment bag.

Is 175 GSM heavy enough for dresses without lining?

For slip dresses, bias-cut midis and gathered skirts, yes - 175 GSM hangs with enough body to avoid a lining in most dress blocks. For structured bodices, boning or heavy beading, buyers usually step up to 220-280 GSM satin, which holds shape but loses the fluid drape.

What MOQ should I expect for satin from China?

For in-stock colours on a running base cloth, 300 metres per colour is standard at serious mills, and 1-metre swatches are effectively free of commitment. Be suspicious of any supplier quoting 50-100 metre 'MOQs' on stock colourways - it usually means distressed or off-grade rolls.

Why is the price the same at 300 m and 2,000 m?

Because dye-house minimum batch economics are already satisfied at 300 m on a 150 cm cloth, the meter rate barely moves inside that window. At Mujia Textile the FOB price is identical from 300 m to 2,000 m per colour, so trial orders pay the same rate as replenishments.

What tests should a satin batch report include?

At minimum: colour fastness to washing and to rubbing (AATCC 61 / AATCC 8 or ISO 105-C06 / ISO 105-X12), light fastness (AATCC 16 / ISO 105-B02), dimensional stability after washing (AATCC 135 / ISO 6330), and pilling resistance (ISO 12945-2 Martindale). Ask for the report to reference the production batch number so you can match it to your shipment.

How do lead times work between sampling and bulk?

A4 swatch cards ship in days; lab dips for custom shades take 5-7 days at $20-50 per colour; strike-offs for printed programs add a week. Bulk lead time is 10-15 days for stock colours and 30-35 days for custom programmes. Sampling runs before bulk and is quoted separately - do not let a salesperson quote one number for both.


Where to Go From Here

The reference cloth used throughout this guide — MJ 22138 pearl crinkle satin — is stocked in 30 colours at 175 GSM, 150 cm, with the full satin supply programme on our category page. Related reading: choosing fabric weight by GSM, MOQ and payment terms from China and fabric care and maintenance.